POLINI Premium Variator Roller Set 16x13mm- 5.5-6.0-6.5-7.0g 110x90x12

POLINI Premium Variator Roller Set 16x13mm- 5.5-6.0-6.5-7.0g 110x90x12POLINI Premium Variator Roller Set 16x13mm 5. 5 6. 0 6. 5 7. 0g The centrifugal weights in the variator are a wearing part and must be replaced at regular intervals depending on the load (wear check approx. every 5000km). A wear of the rollers is characterised by a flattening on one side, the rollers can then no longer slide properly in the variator's raceway. This results in poor acceleration and often a lower final speed as the variator can no

Remove the corresponding cooling fins on the inlet to make room for mounting the required diaphragm suction portAdjust

With 4x25mm pistons

Vespa Modern Vespa GTS 300ie Super Sport (2013

Red: Ignition Cut Out

110mm Conrod

Please check that the colour of the wires from your stator plate match

Lambretta Series 3 Sterling Polished Stainless Steel Performance Exhaust - Hand Made

3 18 D 43 2

50 Tooth - Italian 117

Conversion Cylinder and Head Kit 75cc 7 Port

The motors will remain reliable with these cylinder heads fitted and their endurance and mileage will not be negatively affected

Vespa PX 2011- Centre Floor Mat Retaining Strip Left Hand - Piaggio