CAN Test Box OTC3415 Scan Tools

CAN Test Box OTC3415 Scan ToolsFeatures and Benefits of CAN Test Box OTC3415 CAN Test Box Connects between Diagnostic Link Connector (DLC) and scan tool Alarm warning when voltage drops below 11. 6v or rises above 15. 2v Connect leads for increased diagnosis, analysis, and monitoring LEDs at pin out display signal detection, Flashing LEDs for ECU activity Check power and ground circuits Use this tool for diagnosing electrical faults and CAN bus line activity. Check active protocol

Designed to be lightweight and provide desired flexibility for sanding

Grip ¡N Paint Pliers is specifically designed to fit into the two top slots of the Paint ¡N Stick with its molded guide and mounting screw will securely hold the clamp and components both vertically and horizontally

Easily form 45-degree double

75 hours (high)

1/2" Drive x 7/8" Extra-Deep Thin-Wall Impact Socket

Will not rust or corrode

The plastic welder transfers heat through contact so there is no oxidation of parts by hot air

Mirror polish heads

Width 17-1/2"

Master Fuel Injection Kit

Valve protrusion

Lock Nut Socket - GM