Sika® FerroGard®-510 Patch Concrete sealer

Sika® FerroGard®-510 Patch Concrete sealerSika FerroGard 510 Patch is a zinc based discrete sacrificial anode placed inside a concrete repaired area in reinforced concrete structures which are corroding as a result of chloride ingress and or carbonation. Sika FerroGard 510 Patch anodes are placed along the perimeter of the repair area and fixed to the reinforcement prior to the application of a concrete repair system. The reinforcement outside the repaired area is at greatest corrosion risk

Transparent

Work time per pack: 3 hours at 25ºC • Solvent resistance: Excellent • Chemical Resistance: Good

Smart Battery Indicator: Displays accurate battery capacity and voltage for optimal usage

Flash-off time

Quality You Can Trust

pipes or anywhere else in the structure must also be sealed and made watertight

Quick installation—no additional concrete break out

efflorescence or any other loose or contaminating material

following the same procedure as for new surfaces

380 ml cartridge

Can be applied to substrates with high moisture content (7 days old or mature damp concrete or 10% moisture pbw)

you can achieve a slip-resistant finish by incorporating Luxafloor® Aggregates