Jaguar Bass CIJ - Red Pearl W/B/W Lamination Strat Hardware Kits

Jaguar Bass CIJ - Red Pearl W/B/W Lamination Strat Hardware KitsThis replacement pickguard is made specifically for the Jaguar Bass "Crafted In Japan" with a production date of 2009 or newer. This will not fit the older Japan production versions of this instrument.

Aluminium U channel has a 5mm steel rod inside

These state of the art diecast tuners are designed for usage on contemporary guitars and utilize the same mounting hole common to Grover 305 series medium tuners as well as the common Gotoh tuner with the mounting screw located offset at approximately 7 O'clock or 5 O'clock depending on left or right handed application

Controls: Drive

A middle position reverse wound/reverse polarity version is available to achieve noise cancellation when utilizing a 5 way switch

Nut Width = 1 5/8 in

5mm depth of switch that sits inside the guitar body (excluding thread and toggle knob)

the majority of modern Stratocaster pickguards / scratchplates will require 11 of these screws to secure to the guitar body (earlier vintage examples require 8) and 6 are required to secure the plastic backplate over the tremolo cavity

positive feel when in use

Hinge width = 2 9/64 in

gear and string post

Bushing Threads = 3/8-32

King Lucille