Bando P72H300 SF QD Timing Belt Pulley (SF) PILOT LIGHTS CSW30HBando P72H300 SF The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
Bandos Double V dual-direction flexibility assures long life - as much as 40% more than traditional Double V-belts
Flange Size FC-184 Sealing Type Inpro/Seal Bearing Size Bearing 307 Downloads
625 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator No Slinger Speed 1150 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
51 A Rated torque 27
VESSWDM3558T SPEC
UPC840899107479
US Motors2130
0 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating IP55 KVA Code J Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Termination Flying Leads Motor Type 0960M Mounting Arrangement F1 Number of Poles 4 Overall Length 25
9 RATING 40C AMB-CONT Performance
6 % Electrically Isolated Bearing Not Electrically Isolated Enclosure Modification Severe Duty Features Feedback Device NO FEEDBACK High Voltage Full Load Amps 28
1 POLES 6 NUMBER SPEEDS 1 RPM 1175 RPM 2 1175 RPM 3 1170 RPM 4 975 RPM 5 975 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 400 VOLTS 5 200 FRME 182 SHAFT CODE TC MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CTE OPPOSITE END BEARING 6205-2Z-J/C3 SHAFT END BEARING 6206-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1
Bando - 12B53 To resolve problem applications where belts are flipping over or jumping out of the sheaves
