Phase Change Material - Material that can absorb, store, and release heat look

Phase Change Material - Material that can absorb, store, and release heat lookThis is a micro encapsulated phase change material that consists of small plastic spheres ( ~0. 005 mm) containing a paraffin wax. The wax inside the spheres starts to melt when heated. The wax is able to absorb a relatively large amount of heat during the phase change from solid to liquid. This heat is released when the temperature falls, as the wax will maintain the melting temperature until all the wax has solidified. Used for: It is being marketed

It is used for dissolvable support material for 3D printing and as a hot-melt glue for temporary fastening in production environments

The colour change happens within a five degree temperature range and there are different variants for temperature ranges between -30°C and 120ºC

You can get: A few grams

PC - Polycarbonate Covestro - Makrolon® LED2245

One liter covers 4 m²

ensuring consistent mechanical and physical properties

but when moved quickly – for example

or high corrosion resistance

Remember that the label is single-use

The foam is available with densities ranging from 100 to 400 kg/m³ and a corresponding thermal conductivity from 0

It is also used for model making and prototyping

04 mm up to 4 mm