Fasco D377 OEM Replacement Motor, 1/12 HP, 1 Ph, 60 Hz, 115 V, 1500 RPM, 1 Speed, 4.4" Diameter, OAO PLATES HOLDER SETS (CSW)

Fasco D377 OEM Replacement Motor, 1/12 HP, 1 Ph, 60 Hz, 115 V, 1500 RPM, 1 Speed, 4.4" Diameter, OAO PLATES HOLDER SETS (CSW)OEM Direct Replacement Motor 4. 4" Diameter Shaded Pole Thermally Protected Open Shaft End and Lead End, Enclosed Shell, Air Over Class B Insulation, 40C Ambient Sleeve Bearing 3 8" Diameter Shaft with Flat 20" Leads Extended Studs Lead End Additional Information Thermal ProtectionThermally Protected Speed1500 rpm Current3. 1 A Number of Speeds1 Ambient Temperature40 C ULRecognized Insulation ClassB CSAY Weight4. 40 LB Country Of originMexico Output

08 % Rated voltage 230/460 V Rated current 474/237 A L

Start Type Direct Single-phase Maximum Power Rating Not applicable Rated operational voltage Ue<=600V Control voltage 180-208V50HZ/208-240V60HZ Control devices E-Reset Degree of protection TYPE4X Starters Complements Does Not Contain Rated current (AC-3) 50A Overload relay 25-40 A (RW67) Measuring tool and accessories Not Applicable Button type Unspecified Button color Not Specified Connection Type Not Applicable Downloads

9 POLES 4 NUMBER SPEEDS 1 RPM 1780 RPM 2 1780 RPM 4 1475 RPM 5 1475 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 VOLTS 4 400 VOLTS 5 200 FRME 365 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE DE OPPOSITE END BEARING 6212-2Z-J/C3 SHAFT END BEARING 6313-2Z-J/C3 AMBIENT 40 SERVICE FACTOR 1

2 a Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 12 AWG Motor Type 3956M Mounting Arrangement F1 Number of Poles 4 Overall Length 24

50 % Rated voltage 380 V Rated current 211 A L

5 RUNCAPVOLTS 370 STARTCAPMFD 256 SHIPPING WEIGHT 39 THERMAL PROTECTION NONE BREAKDOWN TORQUE 150

lb Locked rotor torque 240 % Breakdown torque 340 % Locked rotor time 99s (cold) 55s (hot) Moment of inertia (J) 0

22 IN Power Factor 85 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code C-Face Pulley Shaft Indicator Tapped & Key Rodent Screen Included Service Factor 1

1 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating IP56 KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Max Speed 2700 rpm Motor Lead Exit Ko Box Motor Lead Termination Ring Terminals Motor Lead Quantity/Wire Size 3 @ 12 AWG Motor Type 0944M Mounting Arrangement F1 Number of Poles 4 Overall Length 25

PUEP ASSEMBLY FOR ROUTING PURPOSES MN416A01 TAG-INSTAL-MAINT no wire (2100bx)4/22

890 HP @ 60 HZ 2

690 Line Amps 2