Baldor L3501 .33HP, 1725RPM, 1PH, 60HZ, 56, 3414L, TEFC, F1 FIRE PUMP

Baldor L3501 .33HP, 1725RPM, 1PH, 60HZ, 56, 3414L, TEFC, F1 FIRE PUMPSpecs Catalog Number L3501 Enclosure TEFC Frame 56 Frame Material Steel Frequency 60. 00 Hz Motor Letter Type Cap Start, Induction Run Output @ Frequency . 330 HP @ 60 HZ Phase 1 Synchronous Speed @ Frequency 1800 RPM @ 60 HZ Voltage @ Frequency 230. 0 V @ 60 HZ 115. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals CSA UR Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary Box Lead Termination None Base

625 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 3520 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None XP Temp Code T3C Drawings

Amperes 438 A LRC 8

0x(Code G) No load current 145 A Rated torque 1770 ft

Frame 254/6T Output 15 HP (11 kW) Number of Poles 2 Frequency 50 Hz Rated speed 2910 rpm Slip 3

7 % Electrically Isolated Bearing Not Electrically Isolated Feedback Device NO FEEDBACK High Voltage Full Load Amps 80

Load 77° C Start Configuration DOL Break-Down Torque 267 LB-FT Pull-Up Torque 116 LB-FT Locked-Rotor Torque 142 LB-FT Starting Current 215 A Rated Load Rated Load 0% 25% 50% 75% 100% 125% 150% S

lb Locked rotor torque 229 % Breakdown torque 270 % Locked rotor time 36s (cold) 20s (hot) Moment of inertia (J) 5

D XP Division Division II Agency Approvals CCSAUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Mobil SHC 220 (Athens Only) Constant Torque Speed Range 30-60 Current @ Voltage 287

Frame 213JM Output 3 HP (2

Load 48° C Start Configuration DOL Break-Down Torque 141 LB-FT Pull-Up Torque 56

40 % Rated voltage 415 V Rated current 599 A L

02 IN Power Factor 80 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS COMPLIANT Service Factor 1